Debugging of whirlpool air pump
In the process of using the whirlpool gas pump, it is very important that it is very important to debug the whirlpool air pump. First we have to look at its steering. When it starts, we check the balance of the current, and the current can not exceed the rated current if there is a abnormal phenomenon, then we should stop in time. Check.
1, you can start with full pressure or depressurization, but when full pressure starts, the current is about 5-7 times the rated current, and the depressurized torque is proportional to the square of the current.
2, we must check the wiring method, as well as a series of tests, such as the voltage of the work, the phase of the power supply and so on.
3, when testing the car, the number of people can not be less than two people, one to control the power, the other to watch the running situation, if there is no right to stop checking immediately, the specific inspection steps in this is no longer introduced, I believe everyone should be very familiar with.
4, if the speed is normal, then we must check the normality of the current, and remember that the running current can not exceed the rated current.
5, if the inlet of the air inlet is fully open, there will be a possibility of motor damage. When we are in the test, we finally shut the imported or exported valves and open it slowly after the operation.
These are the simple steps to debug the whirlpool air pump. We believe that we can do the debugging in accordance with our introduction, and we will certainly be able to remove the problems and do the normal operation. At the same time, we are a professional whirlpool pump production company. If you have a demand for our products, welcome to contact us, we will do our best for you. Service!
Jinan Golden Bridge Precision Machinery Co., Ltd, located in the beautiful spring city, JINAN, CHINA, has been focused on the development, production and marketing of high quality industrial automation parts.
Jinan Golden Bridge Precision Machinery Co., Ltd, located in the beautiful spring city, JINAN, CHINA, has been focused on the development, production and marketing of high quality industrial automation parts.
Jinan Golden Bridge Precision Machinery Co., Ltd, located in the beautiful spring city, JINAN, CHINA, has been focused on the development, production and marketing of high quality industrial automation parts.
Jinan Golden Bridge Precision Machinery Co., Ltd, located in the beautiful spring city, JINAN, CHINA, has been focused on the development, production and marketing of high quality industrial automation parts.