Today, we share the installation and construction technology of the whirlpool air pump with you, and I hope that it will help you to know the whirlpool air pump through this introduction.
1. the foundation, muffler and shockproof device of the vortex air pump shall meet the requirements of the technical documents of the equipment.
2. when the fans are assembled in the field, the binding of ropes must not damage the surface of the machine.
The compression part of the 3. whirlpool pump's lubrication, oil cooling and the pipeline of the sealing system should be tested. When the technical documents of the equipment are not specified, the pressure of the hydraulic test shall be 1.25-1.5 times of the maximum working pressure, and the pressure of the pressure test shall not be 1.05 times that of the maximum working pressure.
4. the inlet pipe, exhaust pipe, valve parts and adjusting device of the whirlpool pump should be supported separately. When the pipes are connected with the fan, the flange should be plaster and not be forced to connect. The casing should not bear external load to prevent the deformation of the shell.
5. when the pipeline connected to the vortex air pump needs to be cut or welded, the shell should not be deformed.
6. the transverse centerline of the whirlpool air pump shall be the center of the import and export pipeline. The longitudinal centerline shall be driven by the transmission shaft, and the deviation should not be greater than or equal to 5mm..
7. the elevation of the whirlpool air pump is based on the transmission shaft, and the deviation should not exceed + 1mm..
8. the level of the whirlpool air pump is 0.2mm/m.
The above introduction hope to help you, at the same time, our company provides reasonable price, high quality service to win the support and approval of the vast number of users. With years of experience and strong foundation, we will keep pace with the times to provide customers with better products and services. If you need to welcome your calls!