The use and installation of the whirlpool air pump
The impeller of the whirlpool pump consists of dozens of blades, which resembles a huge turbine impeller. The air in the middle of the impeller blade is subjected to the centrifugal force, moving to the edge of the impeller, where the air enters the pump body and circulate in the same way again from the starting point of the blade. The use of the turbo gas pump is installed.
1. Whirlpool air pump should be placed in a more stable place. The surrounding environment should be clean, dry and ventilated.
2. The rotation direction of the impeller of the swirl air pump must be consistent with that of the arrow marked on the fan housing.
3. The working pressure of the high pressure vortex fan is not greater than 8KPa when working, so as not to cause too much heat and overcurrent of the fan to cause damage to the air pump.
4. There are no direct contact friction in the other parts except the two bearings of the motor rotor. The bearing installation method of this fan is mainly divided into two types. The bearings of the first type air pump end are installed in the pump body of the motor chassis and the middle of the impeller. The type of air pump is not required to add grease. The bearing of the second type air pump ends is installed in the middle of the pump cover. The bearings of the air pump end should be regularly added with grease (7018 high speed grease). Once a month, the number of gas pumps should be increased for the three class of continuous working air pumps. The maintenance of the bearings at the fan end of this type of air pump motor is based on the first type of air pump.
5. The filters and silencers at both ends of the inlet and outlet of the vortex air pump should be cleaned timely according to the situation so as not to clog up and affect the use.
7, the replacement of the bearing of the whirlpool pump: the replacement of the bearing must be operated by the person familiar with the repair work. First unscrew the screw on the cover of the pump and disassemble the parts one by one in the graphic order. The dismantled parts should be cleaned and assembled in reverse order. When dismantling, the impeller can not be pried hard, the special Rama is used, and the cushion is not omitted, and the cushion is not omitted. So as not to affect the good clearance of the regulator at the time of the factory.
8. High pressure swirling gas pump strictly prohibits solid, liquid and corrosive gases from entering the pump body.
The above is the use and installation of the whirlpool pump we introduced for you. I hope our introduction can bring useful information for you. At the same time, the price of our company is excellent and the reputation is good. We get the wide praise from the consumers and the society, and set up the brand image of our business mastery, high efficiency, active service and excellent results. We sincerely welcome the businessmen who have the demand vortex pump to contact us. We will provide the necessary guarantee for your development at a reasonable price and quality service.
Jinan Golden Bridge Precision Machinery Co., Ltd, located in the beautiful spring city, JINAN, CHINA, has been focused on the development, production and marketing of high quality industrial automation parts.
Jinan Golden Bridge Precision Machinery Co., Ltd, located in the beautiful spring city, JINAN, CHINA, has been focused on the development, production and marketing of high quality industrial automation parts.
Jinan Golden Bridge Precision Machinery Co., Ltd, located in the beautiful spring city, JINAN, CHINA, has been focused on the development, production and marketing of high quality industrial automation parts.
Jinan Golden Bridge Precision Machinery Co., Ltd, located in the beautiful spring city, JINAN, CHINA, has been focused on the development, production and marketing of high quality industrial automation parts.